View IE-V850E-MC-A_1205171.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

user?s manual target devices v850e1 (nb85e core) v850e/ma1 tm v850e/ma2 tm v850e/sv2 tm v850e/ia1 tm v850e/ia2 tm ie-v850e-mc, IE-V850E-MC-A in-circuit emulator document no. u14487ej2v0um00 (2nd edition) date published september 2003 n cp(k) printed in japan 1999
user?s manual u14487ej2v0um 2 [memo]
user?s manual u14487ej2v0um 3 v850 series, v850e/ma1, v850e/ma2, v850e/sv2, v850e/ia1, and v850e/ia2 are trademarks of nec electronics corporation. windows is either a trademark or a registered trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. ethernet is a trademark of xerox corporation. the information in this document is current as of march, 2003. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec e lectronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec e lectronics" as used in this statement means nec e lectronics c orporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
user ? s manual u14487ej2v0um 4 regional information ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. [global support] http://www.necel.com/en/support/support.html nec electronics america, inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 nec electronics hong kong ltd. hong kong tel: 2886-9318 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-558-3737 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 nec electronics singapore pte. ltd. novena square, singapore tel: 6253-8311 j03.4 n ec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01 sucursal en espa ? a madrid, spain tel: 091-504 27 87 v lizy-villacoublay, france tel: 01-30-67 58 00 succursale fran ? aise filiale italiana milano, italy tel: 02-66 75 41 branch the netherlands eindhoven, the netherlands tel: 040-244 58 45 tyskland filial taeby, sweden tel: 08-63 80 820 united kingdom branch milton keynes, uk tel: 01908-691-133 some information contained in this document may vary from country to country. before using any nec electronics product in your application, piease contact the nec electronics office in your country to obtain a list of authorized representatives and distributors. they will verify:
user?s manual u14487ej2v0um 5 major revisions in this edition page description throughout ? addition of v850e/ma2, v850e/sv2, and v850e/ia2 as target devices ? addition of ie-70000-pci-if-a as corresponding pc interface board ? modification of IE-V850E-MC-A shape p.11 1.1 hardware configuration ? addition of ie-703166-mc-em1 and ie-703114-mc-em1 as option boards ? addition of swex-xxxsd-1 as extension probe p.13 1.3 function specifications ? thorough modification p.13 in the previous edition deletion of 1.4 hardware configuration p.14 1.4 system configuration ? addition of swex-xxxsd-1 as extension probe ? addition of descriptions about connector configurations p.17 1.6.1 when using IE-V850E-MC-A on a standalone basis for performing software debugging ? addition and modification of descriptions p.18 1.6.2 when performing hardware debugging with target system ? addition and modification of descriptions p.21 2.2 pod part names and functions ? thorough modification p.24 3.1.3 insertion of pc interface board ? addition and modification of descriptions p.25 3.2 connection to target system ? modification of descriptions in (1) ? figure 3-1 connection of connector for target connection and connector for emulator connection divided according to target device p.31 3.3.1 power adapter connection ? addition of description to caution p.32 3.3.4 additional information ? addition of description to procedure p.33 3.4.1 power-on procedure ? modification of procedure p.33 3.4.2 power-off procedure ? modification of procedure p.34 addition of chapter 4 shipment settings p.36 addition of appendix b revision history the mark shows major revised points.
user?s manual u14487ej2v0um 6 introduction target readers this manual is intended for users who design and develop application systems using v850e1, v850e/ma1, v850e/ma2, v850e/sv2, v850e/ia1, and v850e/ia2 microcontrollers. purpose debugging can be performed efficiently with these emulators (ie-v850e-mc, ie- v850e-mc-a) connected to a dedicated option board when designing and developing application systems using v850e1, v850e/ma1, v850e/ma2, v850e/sv2, v850e/ia1, and v850e/ia2 microcontrollers. the purpose of this manual is to describe the proper operation of the ie-v850e-mc and IE-V850E-MC-A and their basic specifications. organization this manual is broadly divided into the following parts. overview connection of parts names and functions of parts shipment settings how to read this manual it is assumed that the reader of this manual has general knowledge in the fields of electrical engineering, logic circuits, and microcontrollers. to learn about the basic specifications and operation read this manual in the order listed in contents . to learn the operation methods, command functions, etc., of the ie-v850e-mc or ie- v850e-mc-a read the user?s manual of the debugger (sold separately) that is used. conventions note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information numeral representation: binary ? or b decimal ... hexadecimal ... h prefix representing a power of 2 (address space, memory capacity): k (kilo): 2 10 = 1024 m (mega):2 20 = 1024 2 terminology the meanings of terms used in this manual are listed below. target device this is the device to be emulated. target system the system (user-built system) to be debugged. this includes the target program and hardware configured by the user. emulation cpu device that performs emulation of the target device in the ie-v850e-mc, IE-V850E-MC-A.
user?s manual u14487ej2v0um 7 product name in this manual in this manual, unless otherwise specified, the IE-V850E-MC-A is treated as the representative model. when this manual is used as the ie-v850e-mc manual, replace IE-V850E-MC-A with ie-v850e-mc. for the functional differences between the ie-v850e-mc and the ie-v850e-mc- a, refer to chapter 1 overview . related documents when using this manual, refer to the following manuals. the related documents (user?s manuals) indicated in this publication may include preliminary versions. however, preliminary versions are not marked as such. documents related to development tools (user?s manuals) document name document number v850e1 architecture u14559e v850e/ma1 hardware u14359e v850e/ma2 hardware u14980e v850e/ia1 hardware u14492e v850e/ia2 hardware u15195e v850e/sv2 hardware u16384e ie-v850e-mc, IE-V850E-MC-A (in-circuit emulator) this manual ie-703107-mc-em1 (in-circuit emulator option board) u14481e ie-703114-mc-em1 (in-circuit emulator option board) to be prepared ie-703116-mc-em1 (in-circuit emulator option board) u14700e ie-703166-mc-em1 (in-circuit emulator option board) to be prepared ie-v850e-mc-em1-a (in-circuit emulator) to be prepared ie-v850e-mc-em1-b, ie-v850e-mc-mm2 (in-circuit emulator option board) u14482e v850 series tm development tools (supporting 32-bit os) windows tm based (application note) tutorial guide u16544e operation u16053e c language u16054e ca850 ver.2.50 c compiler package assembly language u16042e pm plus ver.5.10 u16559e id850 ver.2.50 integrated debugger operation windows based u16217e sm850 ver.2.50 system simulator operation windows based u16218e basics u13430e installation u13410e rx850 ver.3.13 or later (real-time os) technical u13431e basics u13773e installation u13774e rx850 pro ver.3.13 (real-time os) technical u13772e rd850 (task debugger) note u11158e rd850 ver.3.01 task debugger u13737e rd850 pro ver.3.01 task debugger u13916e az850 ver.3.10 system performance analyzer u14410e pg-fp4 flash memory programmer u15260e note id850 (ver.1.31 only) supported
user?s manual u14487ej2v0um 8 contents chapter 1 overview ......................................................................................................... ........ 10 1.1 hardware configuration ...................................................................................................... .11 1.2 features.................................................................................................................... .............. 12 1.3 function specifications..................................................................................................... ... 13 1.4 system configuration ........................................................................................................ ... 14 1.5 contents in carton .......................................................................................................... ...... 15 1.6 setup....................................................................................................................... ................ 17 1.6.1 when using the IE-V850E-MC-A on a stand-alone basis for performing software debugging .... 17 1.6.2 when performing hardware debugging with target system ......................................................... 18 chapter 2 part names and functions........................................................................... 19 2.1 main unit part names and functions.................................................................................. 20 2.2 pod part names and functions ........................................................................................... 21 chapter 3 connection of components ......................................................................... 23 3.1 connection to personal computer ...................................................................................... 23 3.1.1 overview of connection .................................................................................................... ........... 23 3.1.2 connection procedure ...................................................................................................... ........... 23 3.1.3 insertion of pc interface board ........................................................................................... ......... 24 3.1.4 connection of pc interface cable .......................................................................................... ...... 24 3.2 connection to target system .............................................................................................. 25 3.3 cable connections........................................................................................................... ..... 31 3.3.1 power adapter connection .................................................................................................. ......... 31 3.3.2 pc interface cable connection............................................................................................. ........ 31 3.3.3 external logic probe connection ........................................................................................... ....... 32 3.3.4 additional information .................................................................................................... .............. 32 3.4 system power-on and power-off ........................................................................................ 33 3.4.1 power-on procedure ........................................................................................................ ............ 33 3.4.2 power-off procedure ....................................................................................................... ............. 33 chapter 4 shipment settings................................................................................................ 3 4 appendix a dimensions ...................................................................................................... ...... 35 appendix b revision history................................................................................................. .36
user?s manual u14487ej2v0um 9 list of figures figure no. title page 1-1 system configuration (qfp package)........................................................................................ ...........................14 1-2 contents in carton........................................................................................................ .........................................15 1-3 accessories ................................................................................................................ ...........................................16 2-1 IE-V850E-MC-A .............................................................................................................. .......................................19 2-2 main unit ................................................................................................................. ..............................................20 2-3 pod (top view)............................................................................................................ ..........................................21 2-4 pod (bottom view)......................................................................................................... ........................................22 3-1 connecting to target system ................................................................................................ ................................25 3-2. direction marking for pin 1 of connector (top view) ....................................................................... .....................29 3-3 connection of IE-V850E-MC-A to target system .............................................................................. ...................30 3-4 power adapter connection.................................................................................................. ..................................31 3-5 pc interface cable connection ............................................................................................. ................................31 3-6 external logic probe connection (using ic clip)........................................................................... .......................32
user?s manual u14487ej2v0um 10 chapter 1 overview the IE-V850E-MC-A and ie-v850e-mc are in-circuit emulators that are used to efficiently debug hardware and software during the development of systems that employ the v850e1, v850e/ma1, v850e/ma2, or v850e/sv2, and the v850e/ia1 or v850e/ia2, respectively. they incorporate functions such as a break/trace function using events, a coverage function for program performance evaluation, and a timer/counter function. to perform debugging, the option board (sold separately) corresponding to the relevant device product must be connected. the ie-v850e-mc is an in-circuit emulator for v dd = 5.0 v. the IE-V850E-MC-A is an in-circuit emulator for v dd = 3.3 v.
chapter 1 overview user?s manual u14487ej2v0um 11 1.1 hardware configuration note for further information, contact daimaru kogyo., ltd. tokyo electronic components division (tel +81-3-3820-7112) osaka electronic components division (tel +81-6-6244-6672) caution be aware that, depending on the operating frequency of the emulator, use of an extension probe may cause abnormal operation. option board ie-703107-mc-em1 ie-703114-mc-em1 ie-703116-mc-em1 ie-703166-mc-em1 the IE-V850E-MC-A can be used as an in-circuit emulator of the v850e1, v850e/ma1, v850e/ma2, v850e/sv2, v850e/ia1, and v850e/ia2 by connecting these boards. extension probe sc- sdn note swex- sd-1 note general-purpose extension probe. product of tokyo eletech corporation. pc interface board ie-70000-pci-if ie-70000-pci-if-a ie-70000-cd-if-a these boards are used to connect the ie-v850e- mc-a to a personal computer. these boards are added into the expansion slot of a personal computer. ie-70000-pci-if: for pci bus (discontinued) ie-70000-pci-if-a: for pci bus ie-70000-cd-if-a: for pcmcia socket network module (ie-70000-mc-sv3) this module is used when a workstation controls the IE-V850E-MC-A via ethernet tm . power adapter (ie-70000-mc-ps-b) ac adapter dedicated to nec electronics in-circuit emulators. in-circuit emulator (IE-V850E-MC-A) separately sold hardware
chapter 1 overview user?s manual u14487ej2v0um 12 1.2 features { maximum operating frequency: 50 mhz (at v dd = 3.3 v, 5.0 v) { extremely lightweight and compact { higher equivalence with target device can be achieved by omitting buffer between signal cables { the following pins can be masked reset, nmi, wait, hldrq { the dimensions and environmental conditions for operation are as follows parameter value maximum operating frequency 50 mhz supply voltage (dc) 5 v operating voltage (dc) v dd = 3.3 v (IE-V850E-MC-A), 5.0 v (ie-v850e-mc) power consumption 11 w (operating frequency: 50 mhz) note height 56 mm length 353 mm external dimensions (refer to appendix a dimensions ) width 90 mm weight 500 g operating temperature range 0 to 40 c storage temperature range 0 to 45 c ambient humidity range 10 to 80% rh note the power consumption is 11.4 w when the option board is connected to the IE-V850E-MC-A.
chapter 1 overview user?s manual u14487ej2v0um 13 1.3 function specifications item specification internal rom 1 mb (max.) emulation memory capacity external memory note execution/pass detection (coverage memory capacity) 1 mb (max.) real-time execution function go, execution from cursor position, automatic go, execution up to cursor position, restart, return out program execution function non-real-time execution function step-in, next over, slow-motion break function event detection break, software break, forced break, break via come function, break on condition met during step execution, failsafe break trace condition all trace, section trace, qualify trace trace function memory capacity 168 bits 32 k frames other functions mapping function, event function, coverage measurement function, snapshot function, stub function, register manipulation function, memory manipulation function, time measurement function, real-time ram sampling function note external emulation memory is not mounted on the IE-V850E-MC-A. external emulation memory is mounted on the separately-sold option board, so refer to the option board user?s manual. caution some of the functions may not be supported depending on the debugger used.
chapter 1 overview user?s manual u14487ej2v0um 14 1.4 system configuration the system configuration when connecting the option board to the IE-V850E-MC-A, which is then connected to a personal computer (pc-9800 series, pc/at tm or compatible) is illustrated below. the connector configuration varies depending on the target device. for details, refer to the user?s manual of the option board. figure 1-1. system configuration (qfp package) remarks 1. <1> personal computer (pc-9800 series, pc/at or compatible) <2> debugger (sold separately), device file (available separately) <3 > pc interface board (ie-70000-pci-if, ie-70000-pci-if-a, ie-70000-cd-if-a: sold separately) <4> pc interface cable (included) <5> IE-V850E-MC-A (in-circuit emulator) <6> option board (sold separately) <7> external logic probe (included with option board) <8> extension probe (sc- sdn, swex- sd-1: sold separately) <9> connector for emulator connection (yqpack sd: included with option board) <10>connector for target connection (nqpack sd: included with option board) <11>device mounting cover (hqpackxxxsd: included with option board) <12>power adapter (ie-70000-mc-ps-b: sold separately) <13>ac100 v power cable (sold separately: included with ie-70000-mc-ps-b) <14>ac220 v power cable (sold separately: included with ie-70000-mc-ps-b) 2. the encircled portions show enlarged figures of the connectors for target connection. <13> <14> <12> <6> <7> <4> <3> <1>, <2> <8> <10> <9> target system device target system <9> <10> target system <10> <11> <11>
chapter 1 overview user ? s manual u14487ej2v0um 15 1.5 contents in carton the carton of the IE-V850E-MC-A contains a main unit, guarantee card, packing list, and accessory bag. make sure that the accessory bag includes this manual and cables. in case of missing or damaged contents, please contact an nec electronics sales representative or distributor. figure 1-2. contents in carton <1> IE-V850E-MC-A 1 <2> accessory bag 1 <3> guarantee card 1 <4> packing list 1 <2> accessory bag <3> guarantee card <4> packing list <1> IE-V850E-MC-A
chapter 1 overview user ? s manual u14487ej2v0um 16 check that the accessory bag contains this manual, an accessory list, and the following accessories. (a) pc interface cable 2 (for the ie-70000-pci-if, ie-70000-pci-if-a 1, for the ie-70000-cd-if-a 1) (b) plastic spacer 2 sets (including 2 plastic screws and 2 washers) (c) nylon rivet 4 figure 1-3. accessories (a) pc interface cable (b) plastic spacers (c) nylon rivets
chapter 1 overview user?s manual u14487ej2v0um 17 1.6 setup the following two system configurations for the IE-V850E-MC-A are possible, depending on the purpose. this section describes the setup procedure according to each purpose as follows. step reference section 1.6.1 when using the IE-V850E-MC-A on a standalone basis for performing software debugging (1) connect interface board to pc 3.1 connection to personal computer before connecting, make sure that the power of the pc is off (when using pci bus). (2) connect option board refer to the user?s manual of the option board (3) set clock operation mode of IE-V850E-MC-A refer to the user?s manual of the option board (4) set cpu operating voltage range refer to the user?s manual of the option board switch cpu operating voltage range. (5) connect cables 3.3 cable connections connect power source adapter and interface cable. (6) power up IE-V850E-MC-A 3.4 system power-on and power-off (7) start debugger 3.4 system power-on and power-off
chapter 1 overview user ? s manual u14487ej2v0um 18 1.6.2 when performing hardware debugging with target system caution before turning on the power of the target system, make sure that the power of the ie-v850e- mc-a is turned on. if the target system is turned on while the IE-V850E-MC-A is off, the target system or the IE-V850E-MC-A may be damaged. (1) connect interface board to pc 3.1 connection to personal computer before connecting, make sure that the power of the pc is off (when using pci bus). (2) connect option board refer to the user ? s manual of the option board (3) set clock operation mode of IE-V850E-MC-A refer to the user ? s manual of the option board (4) set cpu operating voltage range refer to the user ? s manual of the option board switch cpu operating voltage range. (5) connect cables 3.3 cable connections connect power source adapter and interface cable. (6) connect IE-V850E-MC-A to target system 3.2 c onnection to target system there are two connection methods: connecting the connection tab of the option board to the target system directly, and connecting the connection tab of the option board to the target system via an extension probe (sold separately). (7) power up IE-V850E-MC-A, then target system 3.4 system power-on and power-off (8) start debugger 3.4 system power-on and power-off
user?s manual u14487ej2v0um 19 chapter 2 part names and functions this chapter describes the name and function of each part of the IE-V850E-MC-A, as well as switch settings. figure 2-1. IE-V850E-MC-A pod main unit
chapter 2 part names and functions user?s manual u14487ej2v0um 20 2.1 main unit part names and functions figure 2-2. main unit pc interface connector power jack led power switch (1) power switch this is the main power on/off switch of the IE-V850E-MC-A. the on/off direction is printed on the chassis of the main part. (2) power jack a power adapter (ie-70000-mc-ps-b: sold separately) is connected here. (3) pc interface connector the pc interface cable (included) is connected here. (4) led lit when the power is on, extinguished when the power is off.
chapter 2 part names and functions user?s manual u14487ej2v0um 21 2.2 pod part names and functions figure 2-3. pod (top view) emulation cpu trg gnd ld2 tp3 ld1 fpga l e d a1 direction of a1 pin on emulation cpu tp2 tp1 jp2 1 2 11 12 memory (1) test pins tp1: for shipment test tp2: ground tp3: ground (2) jp2 the setting varies depending the option board to be set. for how to set, refer to the manual of the option board (unless specified, use this jumper with the shipment setting. after shipment, the jumper is set with 1 and 2 shorted and 7 and 8 shorted). (3) ld1, ld2 name status description on switch of main unit = on ld1 (red) off switch of main unit = off on power supply of target system = on ld2 (amber) off power supply of target system = off
chapter 2 part names and functions user ? s manual u14487ej2v0um 22 figure 2-4. pod (bottom view) (1) option board connection pin connect this pin to the pga socket on the option board (sold separately) side. option board connection pin
user?s manual u14487ej2v0um 23 chapter 3 connection of components the IE-V850E-MC-A enables debugging and programming of target devices by connecting several components and configuring the desired system. this chapter describes the various components and their connection. read this chapter when connecting system components. for the sequence of system configuration, refer to 1.6 setup . for details of software startup, refer to the user?s manual of the debugger that is used. 3.1 connection to personal computer 3.1.1 overview of connection the IE-V850E-MC-A can use a personal computer (pc-9800 series, or pc/at compatible) as the host machine. the connection to each type of personal computer is described below. (1) desktop pc when using a desktop pc, insert the following pc interface board in the external expansion slot of the desktop pc and connect the computer to the IE-V850E-MC-A. ? ie-70000-pci-if, ie-70000-pci-if-a: for pci bus (can also be used in a pc98-nx series and pc/at or compatible) (2) notebook-type personal computer when using a notebook-type personal computer, insert the pc card interface (ie-70000-cd-if-a: sold separately) in the pc card slot of the computer and connect the computer to the IE-V850E-MC-A. 3.1.2 connection procedure (1) powering off perform connection while the power of each unit is off. if the power of the IE-V850E-MC-A or the pc is on, turn off the power first. (2) pc interface board setting when the ie-70000-pci-if and ie-70000-pci-if-a are shipped, an 8-bit connector board is premounted. however, when the IE-V850E-MC-A is connected, this must be changed to a 32-bit connector board. the 32-bit connector board is supplied with the ie-70000-pci-if and ie-70000-pci-if-a. for details, refer to the ie-70000-pci-if, ie-70000-pci-if-a user?s manual (to be prepared).
chapter 3 connection of components user?s manual u14487ej2v0um 24 3.1.3 insertion of pc interface board mount the pc interface board on the pc following the instructions described in the user?s manual of the pc. when connecting the ie-70000-pci-if or ie-70000-pci-if-a, turn off the power to the pc first. 3.1.4 connection of pc interface cable connect the pc interface cable to the interface board connector.
chapter 3 connection of components user?s manual u14487ej2v0um 25 3.2 connection to target system there are two connection methods: connecting the connection tab of the option board to the target system directly and connecting the connection tab of the option board to the target system via an extension probe. (1) connect the connectors to the target system. the connection methods vary depending on the target device, so connect as shown in the figures below. figure 3-1. connecting to target system (1/5) (a) when the target device is the v850e/ma1 (qfp package), v850e/ia1, v850e/ia2 (gc package) <1> fix to the specified position by soldering. <2> insert. <3> fix using yqguide. caution the direction of pin 1 is indicated on the nqpackxxxsd. refer to figure 3-2. yqguide yqpackxxxsd nqpackxxxsd <1> <2> <3> <3> target system
chapter 3 connection of components user ? s manual u14487ej2v0um 26 figure 3-1. connecting to target system (2/5) (b) when the target device is the v850e/ma2 <1> fix to the specified position by soldering. <2> insert. <3> fix using yqguide. <4> insert the vp-v850e/ma1-ma2. caution the direction of pin 1 is indicated on the nqpack100sd. refer to figure 3-2. yqguide yqpack100sd nqpack100sd <1> <2> <3> <3> target system <4> vp-v850e/ma1-ma2
chapter 3 connection of components user ? s manual u14487ej2v0um 27 figure 3-1. connecting to target system (3/5) (c) when the target device is the v850e/ia2 (gf package) yqguide yqpack100sd nqpack100sd <1> <2> <3> <3> target system <4> nexb-2r100sd/rb <1> fix to the specified position by soldering. <2> insert. <3> fix using yqguide. <4> insert the nexb-2r100sd/rb. caution the direction of pin 1 is indicated on the nqpack100rb. refer to figure 3-2.
chapter 3 connection of components user ? s manual u14487ej2v0um 28 figure 3-1. connecting to target system (4/5) (d) when the target device is the v850e/ma1 (bga package) <1> fix to the specified position by soldering. (align the misinsertion prevention pins of both the cssocket and the target system sides.) <2> insert lspack in cssocket. <3>, <4> fix csice using yqguide. caution the target connection connector is a guideless type. if a guide is required, use the part whose part number is not suffixed with n. lspack161a1413n01 cssocket161a1413n01n note csice161a1413n02 <1> <2> <3> <4> <4> yqguide
chapter 3 connection of components user ? s manual u14487ej2v0um 29 figure 3-1. connecting to target system (5/5) (e) when the target device is the v850e/sv2 <1> fix to the specified position by soldering. (align the misinsertion prevention pins of both the bssocket and the target system sides.) <2> insert csice in bssocket. figure 3-2. direction marking for pin 1 of connector (top view) pin 1 direction connection tab of option board connector for target connection (nqpack sd) csice257b2014n01 bssocket257b2014n01 <1> <2> target system
chapter 3 connection of components user?s manual u14487ej2v0um 30 (2) connect the connection tab of the opt ion board to the target system dire ctly or via the extension probe. in either case, make sure that the pin 1 pos ition (cutout corner of connector) is aligned. the connection procedure is as follows. caution be careful not to break or bend the pins of connector, socket, and extension probe when connecting. (a) when connecting to target system directly <1> turn off the power of the IE-V850E-MC-A (power switch off). <2> connect the IE-V850E-MC-A to the option board. <3> connect the connection tab of the option board to the target system. (b) when connecting to targ et system via extension probe <1> turn off the power of the IE-V850E-MC-A (power switch off). <2> connect the IE-V850E-MC-A to the option board. <3> connect the extension probe to the option board. <4> connect the top of the extens ion probe to the target system. figure 3-3. connection of IE-V850E-MC-A to target system when using extension probe when directly connecting target system target system
chapter 3 connection of components user?s manual u14487ej2v0um 31 3.3 cable connections 3.3.1 power adapter connection insert the cable of the power suppl y adapter (ie-70000-mc-ps-b: sold separat ely) to the power jack of the ie- v850e-mc-a main unit. caution use only the ie-70000-mc-ps-b for supplying pow er. use of other power supplies may damage the IE-V850E-MC-A due to differences in the pow er jack polarity, voltage, and power supply capacitance. figure 3-4. power adapter connection power jack power adapter (ie-70000-mc-ps-b) 3.3.2 pc interface cable connection connect the pc interface cable to the pc inte rface connector of the IE-V850E-MC-A main unit. figure 3-5. pc interface cable connection pc interface connector pc interface cable
chapter 3 connection of components user ? s manual u14487ej2v0um 32 3.3.3 external logic probe connection when using the external logic probe, connect it to the option board connector. for details, refer to the option board user ? s manual. 3.3.4 additional information the IE-V850E-MC-A can perform real-time tracing of the emulation cpu bus cycle. in addition, an external logic probe is included with the option board for the following three functions. for details on its use, refer to the debugger user ? s manual. (1) any eight signals can be traced in real time. (2) tracer start/stop is enabled using any eight signals. (3) break setting is enabled using any eight signals. cautions 1. connect the external logic probe only to a ttl-level signal line. the high level and low level cannot be detected correctly if connected to lines other than ttl-level signal lines. note that the sensor of the IE-V850E-MC-A and option board may be damaged by an excessive voltage level. 2. when connecting the external logic probe, use a commercially available ic clip. procedure (1) turn off the power of the target system. (2) turn off the power of the IE-V850E-MC-A. (3) attach an ic clip to any device on the target system. (4) connect the external logic probe to the attached ic clip. (5) connect the gnd of the external logic probe to the ground of the target system. figure 3-6. external logic probe connection (using ic clip) target system external logic probe ic clip
chapter 3 connection of components user ? s manual u14487ej2v0um 33 3.4 system power-on and power-off after connecting the IE-V850E-MC-A and each system component (pc, target system, etc.), start up and shut down the system using the following procedure. 3.4.1 power-on procedure make sure that the IE-V850E-MC-A is correctly connected to the pc before powering on. if the IE-V850E-MC-A is powered on using a procedure other than the following one, the IE-V850E-MC-A or the target system may be damaged. (1) turn on the power switch of the IE-V850E-MC-A. set the power switch to ? on ? after connecting the power adapter to the power jack of the IE-V850E-MC-A and the plug to the power outlet. (2) turn on the power of the target system. (3) start the debugger. 3.4.2 power-off procedure (1) terminate the debugger. (2) turn off the power switch of the target system. (3) turn off the power switch of the IE-V850E-MC-A.
user?s manual u14487ej2v0um 34 chapter 4 shipment settings item setting description jp2 1 2 11 12 after shipment, the jumper is set with 1 and 2 shorted and 7 and 8 shorted. the setting varies depending on the option board, so for how to set, refer to the user ? s manual of the option board. unless specified in the user ? s manual of the option board, use the jumper with the shipment setting.
user?s manual u14487ej2v0um 35 appendix a dimensions (unit: mm) 353 55 166 58.8 56 99 27 132 top view side view bottom view 75
user?s manual u14487ej2v0um 36 appendix b revision history a history of the revisions up to this edition is shown below. ?applied to:? indicates the chapters to which the revision was applied. edition contents applied to: ? addition of v850e/ma2, v850e/sv2, and v850e/ia2 as target devices ? addition of ie-70000-pci-if-a as corresponding pc interface board ? modification of IE-V850E-MC-A shape throughout 1.1 hardware configuration ? addition of ie-703166-mc-em1 and ie-703114-mc-em1 as option boards ? addition of swex-xxxsd-1 as extension probe 1.3 function specifications ? thorough modification deletion of 1.4 hardware configuration 1.4 system configuration ? addition of swex-xxxsd-1 as extension probe ? addition of descriptions about connector configurations 1.6.1 when using IE-V850E-MC-A on a standalone basis for performing software debugging ? addition and modification of descriptions 1.6.2 when performing hardware debugging with target system ? addition and modification of descriptions chapter 1 overview 2.2 pod part names and functions ? thorough modification chapter 2 part names and functions 3.1.3 insertion of pc interface board ? addition and modification of descriptions 3.2 connection to target system ? modification of descriptions in (1) ? figure 3-1 connection of connector for target connection and connector for emulator connection divided according to target device 3.3.1 power adapter connection ? addition of description to caution 3.3.4 additional information ? addition of description to procedure 3.4.1 power-on procedure ? modification of procedure 3.4.2 power-off procedure ? modification of procedure chapter 3 connection of components addition of chapter 4 shipment settings chapter 4 shipment settings 2nd edition addition of appendix b revision history appendix b revision history

▲Up To Search▲

Price & Availability of IE-V850E-MC-A

	To Download IE-V850E-MC-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .